52
51
9
50
53
54
55
56
57
58
51
9
64
65
TM 9-4940-568-34
5-30
5-4. ENGINE REPLACEMENT (CONT).
(6)
Install ten screws (55) and lockwashers (56)
on flywheel (57) and flywheel housing (58)
and remove alignment pins (64).
(7)
Tighten screws (55) to 50 lb-ft (23 N.m).
(8)
Using engine turnover tool, turn engine over
and install eight screws (52) and washers
(53) on drive discs (54) and remove
alignment pins (65).
(9)
Tighten screws (52) to 35 lb-ft (16 N.m).
(10)
Remove lifting device from engine (9).
(11)
Remove engine turnover tool (51) from
engine (9).
(12)
Install cover (50) on engine (9).
