TM 9-4940-568-34
3-50
3-14. SWING DRIVE ASSEMBLY REPLACEMENT (Continued)
(27) Apply sealing compound to threads of
oil fill pipe (11) and install oil fill pipe (11)
in swing drive assembly (1).
(28) Apply sealing compound to threads of
two screws (7) and install cover (8) on
swing drive assembly (1) using two
screws (7). Tighten screws (7) to 19 lb-ft
(26 N.m).
(29) Apply sealing compound to threads of
two screws (2) and install swing drive
cover (5) on subframe assembly (6)
using two washers (4), lockwashers (3)
and screws.
NOTE
If turntable was turned during
removal, return turntable to
original position. If turntable and
turntable bearing were removed
during removal, install turntable
and turntable bearing (refer to
para 3-29 and 3-30).
END OF TASK
Follow-On Maintenance
Install swing drive
brake (para 3-13).
Fill swing drive assembly
with oil
(TM 9-4940-568-10).
6
5
2, 3, 4
1
8
7
11