TM 9-4940-568-20
D-4
D-4. HOSES AND TUBES.
Fabricate hoses and tubes from bulk hose or tube stock listed in Table D-3. Use a fine toothed hacksaw or suitable
cutting device and cut hose/tube to desired length. Place fitting A in vise and screw hose/tube counterclockwise until
hose/tube bottoms out in fitting. Back off ¼ turn. Repeat for fitting B.
Table D-3. Hoses and Tubes
Hose/Tube
Bulk Hose
Cutoff Length
Part Number
Part Number
Inches
cm
