TM 9-4940-568-20
11-37
Materials/Parts
Cloth, Cleaning (Item 13, Appendix C)
Grease, Automotive and Artillery (GAA)
(Item 20, Appendix C)
Sealing Compound (567) (Item 32, Appendix C)
Solvent, Drycleaning (Item 38, Appendix C)
Equipment Condition
FRS unloaded, (TM 9-4940-568-10)
Air reservoir drained, (TM 9-4940-568-10)
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(Item 30, Appendix G)
Materials/Parts - Continued
Gasket (Item 7, Appendix F)
Locknut (4) (Item 35, Appendix F)
Locknut (4) (Item 29, Appendix F)
Locknut (4) (Item 49, Appendix F)
Locknut (6) (Item 24, Appendix F)
Snap Ring (Item 96, Appendix F)
This task covers:
a. Removal
b. Disassembly
c. Cleaning/Inspection
d. Assembly
e. Installation
f. Follow-On Maintenance
INITIAL SETUP
11-12. PNEUMATIC HOSE REEL AND 3/8” HOSE REPAIR.
a.
Removal.
Hose reel assembly is under pressure. Avoid releasing latching mechanism during
removal and installation. Failure to comply could result in injury to personnel.
(1)
Remove two screws (1), nuts (2) and hose bumper assembly (3) from hose (4).
(2)
Payout entire length of hose (4) from hose reel assembly (5).
4
5
3
4
1
2
