TM 9-4940-568-20
11-13
(5)
Remove two belts (7) from pulleys (8).
b. Installation.
(1)
Position two belts (7) on pulleys (8).
NOTE
Belts are properly adjusted when
there is 1/2 in. of deflection when
measured between pulleys.
(2)
Turn belt tensioner (3) and adjust tension of
belt to provide a 1/2 in. of deflection.
(3)
Tighten four screws (1) on air compressor
frame (2).
(4)
Install cover (5) and secure with seven new
self-tapping screws (4) on beltguard shroud
(6).
c.
Follow-On Maintenance:
Connect batteries, (TM 9-4940-568-10).
Start generator, (TM 9-4940-568-10).
Start compressor and check belt operation,
(TM 9-4940-568-10).
Shut off generator and recheck belt tension,
(TM 9-4940-568-10).
END OF TASK
7
7
1
3
5
4
8
6
8
2
