TM 9-4940-568-20
9-12
9-2. ARGON HOSE REEL AND BRACKET REPLACEMENT (CONT).
(4)
Coat threads of adapter (13) and elbow (12)
and install in swivel assembly (14).
Hose reel assembly is under
tension. Avoid releasing latching
mechanism during removal and
installation. Failure to comply
could result in injury to
personnel.
NOTE
Prior to output hose installation, it
is necessary to preload the hose
reel assembly. Perform Step (5)
to preload the hose reel assembly.
(5)
Manually turn the hose reel (8) until spring
is tight, back off three turns, and then latch.
(6)
Apply sealant to threads and route hose (7)
through guide arm bracket (18) and hose
reel slot and install on elbow fitting (12).
(7)
Install two clamps (11), four washers (10),
and locknuts (9) on hose reel assembly (8).
12
8
13
14
7
9
10
11
7
18
