TM 9-4940-568-20
8-118
8-39. LOW OIL PRESSURE SENSOR REPLACEMENT (CONT).
b. Installation.
4
2
3
1
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away from
open fire and use in well-ventilated area. If adhesive, solvent, or sealing compound
gets on skin or clothing, wash immediately with soap and water.
(1)
Apply sealing compound to threads of low oil pressure sensor (2).
(2)
Install low oil pressure sensor (2) in tee fitting (3).
(3)
Install two wires (1) on low oil pressure sensor (2) as noted in removal.
c.
Follow-On Maintenance:
Connect batteries, (TM 9-4940-568-10).
Start generator and check for leaks, (TM 9-4940-568-10).
Install rear panel, (TM 9-4940-568-10).
END OF TASK
