TM 9-4940-568-20
6-24
6-3. EYE WASH TANK AND BRACKET REPLACEMENT (CONT).
b. Installation.
NOTE
Install cable ties as required.
Install fittings, elbows, adapters,
and hoses as notes prior to
removal.
(1)
Install clip (38) on hose reel (42) with screw
(41), lockwasher (40) and nut (39).
(2)
Position hose (8) in FRS.
(3)
Install nozzle (37) on clip (38).
Adhesives, solvents and sealing
compounds can burn easily, can
give off harmful vapors and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in
well-ventilated area. If adhesive,
solvent or sealing compound gets
on skin or clothes, wash
immediately with soap and water.
(4)
Apply sealing compound to threads of
fitting (36).
(5)
Install fitting (36) on sleeve (33).
(6)
Position hose (8) on fitting (36) and tighten
clamp (35).
(7)
Apply sealing compound to threads of hose
(34).
(8)
Install hose (34) on sleeve (33).
(9)
Install sleeve (33) on shelter wall (26) with
cushion clip (32), washer (31) and screw
(30).
34
36
30
31
32
33
35
8
42
38
37
39
40
41
38
26
8
