TM 9-4940-568-20
6-2
Materials/Parts
Cable Ties (Item 10, Appendix C)
Tags, Identification (Item 40, Appendix C)
Gasket (Item 6, Appendix F)
Gasket (Item 5, Appendix F)
Retaining Ring (Item 94, Appendix F)
This task covers:
a. Removal
b. Disassembly
c. Assembly
d. Installation
e. Follow-On Maintenance
INITIAL SETUP
Equipment Condition
FRS unloaded, (TM 9-4940-568-10)
Batteries disconnected, (TM 9-4940-568-10)
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(Item 30, Appendix G)
Pan, Drain (Item 20, Appendix G)
6-2. HEATER ASSEMBLY AND HEATER VENT REPAIR.
Materials/Parts - Continued
Lockwasher (8) (Item 77, Appendix F)
Screw, Self-Tapping (A/R) (Item 100,
Appendix F)
Personnel Required
Two
a.
Removal.
1
3
4
5
2
Heater assembly may be hot. Ensure heater assembly is cool before performing this
task or injury to personnel may result.
NOTE
Tag and mark all hoses and connectors prior to removal.
Remove cable ties as required to remove wires and fuel hoses.
Place drain pan under fuel hose as necessary.
(1)
Remove two self-tapping screws (1) and clamps (2) from shelter (3) and power line (4). Discard
self-tapping screws.
(2)
Disconnect connector (5).
