TM 9-4940-568-20
4-38
Material/Parts
Locknut (6) (Item 35, Appendix F)
Locknut (3) (Item 54, Appendix F)
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Personnel Required
Two
Equipment Condition
FRS unloaded, (TM 9-4940-568-10)
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(Item 30, Appendix G)
Drill, Electric (Item 7, Appendix G)
Drill Set, Twist (Item 9, Appendix G)
4-11. TOOL CABINET REPLACEMENT.
a.
Removal.
NOTE
There are five tool cabinets
located on the FRS. All five are
removed in a similar manner with
the exception of items mounted
on the working surface above
cabinet. Cabinet B is shown.
(1)
Remove all drawers (1) from cabinet B (2).
(2)
Remove three locknuts (3), washers (4),
washers (5), washers (6), screws (7) and
vise (8) from wooden top (9) on cabinet B
(2). Discard locknuts.
(3)
Remove two screws (10) and washers (11)
from cabinet B (2) and wooden top (9).
2
8
1
7
6
3
4
5
10
11
9
2
2
