TM 9-4940-568-20
3-52
3-13. RECHARGEABLE HANDLAMP AND BASE REPAIR (CONT).
d.
Installation.
20
21
26
28
27
19
25
22
23
24
21
NOTE
There are three rechargeable handlamps. Follow Steps (1) through (5) for rechargeable
handlamps located in the shelter and Steps (6) through (14) for installation of rechargable
handlamp located on the generator.
If generator is new, mounting holes for handlamp base must be made.
Install wires in position noted prior to removal.
(1)
Install lamp charger (27) with four self-tapping screws (26) on shelter panel (28).
(2)
Pull handlamp wires through junction box (21) and install nut (25).
(3)
Install wire (24) and wire connector and crimp.
(4)
Install screw (22) and ground wire (23) in junction box (21).
(5)
Install cover plate (20) on junction box (21) with four screws (19).
