3
2
4
7
5
1
4
6
8
TM 9-4940-568-20
3-41
This task covers:
a. Disassembly
b. Assembly
c. Follow-On Maintenance
INITIAL SETUP
Equipment Condition
FRS unloaded, (TM 9-4940-568-10)
Batteries disconnected, (TM 9-4940-568-10)
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(Item 30, Appendix G)
3-11. DOME LIGHT ASSEMBLY REPLACEMENT.
a.
Disassembly.
NOTE
The following procedures are
identical for both dome light
assemblies. Right side is shown.
(1)
Disconnect electrical lead (1) from dome
light assembly (2).
(2)
Remove eight screws (3) and dome light
cover (4) from dome light base (5).
(3)
Remove two bulbs (6) from dome light
cover (4).
(4)
Remove four self–tapping screws (7) and
dome light base (5) from bracket (8).
