TM 9-4940-568-20
3-13
(4)
Remove two wires (6) from circuit breaker
(7).
(5)
Remove jam nut (8) and circuit breaker (7)
from door (4).
(6)
Loosen two screws (9) on ON/OFF switch
(1) and remove two wires (10).
(7)
Remove nut (11) and ON/OFF switch (1)
from door (4).
b.
Installation.
NOTE
Install wires in locations as noted
prior to removal.
All six circuit breakers are
installed the same way. Crane 10
amp circuit breaker shown.
(1)
Install ON/OFF switch (1) on door (4) with
nut (11).
(2)
Position two wires (10) on ON/OFF switch
(1) and tighten screws (9).
(3)
Install circuit breaker (7) on door (4) with
jam nut (8).
(4)
Install two wires (6) on ciruit breaker (7).
8
7
5
11
1
4
9
10
6
7
1
8
7
11
1
4
9
10
6
7
1
