TM 9-4940-568-10
2-175
PLS truck engine speed must be at idle before using hydraulic selector switch or
damage to equipment may result.
(9)
Start engine on PLS truck and turn hydraulic selector switch (19) to AUTO position.
(10)
If FRS crane has a failure in the hydraulic system but not the electrical system, go to Step (11). If both
systems have failed, perform Steps (13) through (15).
NOTE
Prior to removing load from crane, note position of crane.
(11)
On FRS crane turn POWER switch (20) to ON. Operate main controls (21) to remove load from the FRS
crane.
(12)
On FRS crane turn POWER switch (20) to OFF. Go to Step (16).
19
20
21
