TM 9-2330-389-14&P
4-32.
BRAKEDRUM MAINTENANCE (Con’t).
NOTE
If inner or outer cone and rollers need to be replaced, cone and rollers and races
are replaced as a set.
7.
Clean and inspect inner and outer cone and rollers (10 and 8) in accordance with TM 9-214. Discard if damaged.
8.
Inspect brakedrum (2) for broken, stripped, or missing studs (12). If stud is broken, stripped, or missing, repair
brakedrum (2).
b.
DISASSEMBLY
WARNING
DO NOT handle brake shoes, brake drums, or other brake components unless area
has been properly cleaned. There may be asbestos dust on these components,
which can be dangerous if you touch it or breathe it. Wear an approved filter mask
and gloves. Never use compressed air or a dry brush to clean brake components.
Dust may be removed using an industrial-type vacuum cleaner. Clean dust or mud
away from brake components with water and a wet, soft cloth. Failure to follow
this warning may result in serious illness or death to personnel.
NOTE
Brakedrum may be removed as an assembly. Disassemble only if replacement of a
part is required.
4-48
