TM 9-2330-359-14&P
2-11. LOADING SEMITRAILER (Con’t).
d. Loading Semitrailer Using Cargo Ring and Hook.
(1) Insert ring and hook(14) in siderail (3)
and turn approximately 45° to prevent hook from disen-
gaging.
WARNING
Ring and hook must be rotated to engaged po-
sition before applying pressure to tighten
strap/chain. Failure to follow this warning may
cause strap/chain to disengage, resulting in in-
jury to personnel.
NOTE
When hauling ammunition items, ring and hook
may be used in combination with other items
listed in the Additional Authorization List (Ap-
pendix D). For additional information on ammu-
nition transport, refer to DA Pam 75-5.
(2) Secure and tighten strap/chain to ring
and hook (14).
e. Loading Semitrailer Using Tie-down Assembly (“Mickey Mouse”).
(1) Insert tie-down assembly (15) in side-
rail (3) and turn approximate y 450 to prevent tie-down
assembly from disengaging.
WARNING
Tie-down assembly must be rotated to en-
gaged position before applying pressure to
tighten strap/chain. Failure to follow this warn-
ing may cause strap/chain to disengage, re-
sulting in injury to personnel.
NOTE
Tie-down assemblies are used when loading
and transporting ammunition. For additional in-
formation on ammunition transport refer to
DA Pam 75-5.
(2) Secure and tighten strap to tie-down
assembly (15).
TA507988
2-13
