TM 9-2330-324-14&P
0041
00-2
DRAWBAR COUPLER REPLACEMENT—Continued
0041
00
INSTALLATION
WARNING
Ensure that landing gear is lowered and locked and wheels are securely
chocked. Failure to follow this warning may cause trailer to roll, resulting
in injury to personnel or damage to equipment.
N O T E
Torque each nut (4) to 20 lb-ft (27.1 N•m) and then tighten to next hole
for cotter pin (3).
Install drawbar coupler (5), eight (as necessary) flatwashers (2), two screws (1), nuts (4), and new cotter
pins (3).
1
5
3
2
4
END OF TASK
