TM 9-2330-324-14&P
0032
00-4
HANDBRAKE LINKAGE AND CABLES MAINTENANCE—Continued
0032
00
REMOVAL—Continued
10.
Disconnect handbrake cable assembly (19) from brake lever (30).
11.
Loosen two nuts (32) from guide bracket (33) and backing plate (31).
12.
Remove handbrake cable assembly (19).
13.
Inspect cable assembly (19) for cracks, breaks, or damage.
14.
Replace defective parts.
15.
Repeat steps 10 through 14 for other side.
31
30
19
32
31
33
19
INSTALLATION
WARNING
If trailer is not coupled to towing vehicle, ensure that landing gear is
lowered and locked. Failure to follow this warning may cause trailer t o
roll, resulting in injury to personnel or damage to equipment.
1.
Insert handbrake cable assembly (19) through guide bracket (33) and backing plate (31).
2.
Tighten two nuts (32).
3.
Connect handbrake cable assembly (19) to brake lever (30).
4.
Repeat steps 1 through 3 for other side.
