TM 9-2330-324-14&P
0024
00-3
GENERAL MAINTENANCE INSTRUCTIONS—Continued
0024
00
Castings, Forgings, and Machined Metal Parts
WARNING
Solvents can burn easily, can give off harmful vapors, and are harmful t o
skin and clothing. To avoid injury or death, keep away from open fire and
use in a well-ventilated area. If solvent gets on skin or clothing, wash
immediately with soap and water.
Clean inner and outer surfaces with cleaning solvent.
Remove grease and accumulated deposits with a stiff bristle brush.
WARNING
Compressed air used for cleaning or drying purposes, or for clearing
restrictions, should never exceed 30 psi (207 kPa). Wear protective
clothing (goggles/shield, gloves, etc.) and use caution to avoid injury t o
personnel.
Clear all threaded holes with compressed air to remove dirt and cleaning fluids.
Oil Seals, Electrical Cables, and Flexible Hoses
CAUTION
Do not wash oil seals, electrical harnesses, and flexible hoses with dry-
cleaning solvent or mineral spirits. Serious damage or destruction o f
material would result.
Wash electrical cables and flexible hoses with a solution of soap and water and wipe dry.
Bearings
Clean bearings in accordance with TM 9-214.
INSPECTION INSTRUCTIONS
N O T E
All damaged areas should be marked for repair or replacement.
All components and parts must be carefully checked to determine if they are serviceable for use, can be
repaired, or must be scrapped.
