TM 9-2330-238-14
2-14.
EXPANDING AND RETRACTlNG VAN BODIES (M447, M447C, M749, AND M750)
(Con’t).
j.
Removing Van Body Curtains (M749. Early Model).
NOTE
M749 early model van body has for curtain sections for each side.
(1)
Remove snap fasteners securing curtain sections to each other.
(2)
Unfasten and remove curtain sections from top folding side door.
(3)
Fold curtain sections and store in stowage box.
k. Remove Van Body Curtains (M447 and M750)
.
NOTE
M447 and M750 vans have two canvas curtains, one for each side of van, marked
R and L for right and left sides. Removing curtains requires two people.
(1)
Unfasten bottom of curtain from studs on lower folding side door.
(2)
Unfasten top of curtain from studs on upper folding side door.
(3)
Repeat steps 1 and 2 to remove curtain from opposite side of van body.
(4)
Fold curtains and store in stowage box.
l.
Retracting Van Bodies (M447. M447C. M749. and M750) .
NOTE
Instructions for retracting van bodies are the same for both sides.
(1)
Detach chain (6) from loop (3) on rear wall and pull chain out of top loops of guard rail posts (7).
Remove chain from loop on front wall.
(2)
Unscrew threaded ends of four guards rail posts (7) from floor flanges (5). Install guard rail posts
in bracket on front wall.
2-24.6
Change 1
