TM 9-2330-238-14
5-7. AXLE AND BRACKET ASSEMBLY SPRING SEAT MAINTENANCE (Con’t).
4.
Remove six bolts (24), Iockwashers (23), access cover (22), and gasket (21) from spring seat (4). Discard
Iockwashers and gasket.
5.
Unbend tangs of keywasher (19). Remove outer adjusting nut (20), keywasher, and inner adjusting nut (18) from
spindle (26) of tandem axle. Remove outer tapered bearing (17).
6.
Remove spring seat (4) from spindle (26) of tandem axle by rocking spring seat left and right and carefully
sliding spring seat off. Remove machine key (9) from spring seat.
7.
Remove inner tapered bearing (14), oil seal (13), packing retainer (12), oil seal washer (11), and flatwasher (10).
Discard oil seal and oil seal washer.
8.
Remove two bolts (7) and Iockwashers (25) from spring seat (4). Discard Iockwashers.
TA702065
5-14
