TM 9-2330-238-14
Section X. BODY MAINTENANCE
Bonnet Front Door Linkage Replacement (M313 and M447C) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cable Reel Maintenance (All Models Except M749) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Counterbalance Maintenance (Model M313) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Counterbalance Maintenance (M447, M447C, and M750) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Counterbalance Maintenance (M749Converto Model 8929) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Counterbalance Maintenance (M749 Southwest Model VRP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Splashguard Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Spring Tensioner Replacement.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-148
4-126
4-130
4-136
4-140
4-144
4-122
4-150
4-58. SPLASHGUARD REPLACEMENT.
This Task Covers:
a.
Front Splashguard Removal (All models except d.
Rear Splashguard Installation (All models except
M749)
M313)
b.
Front Splashguard Installation (All models except
Rear Splashguard Removal (M313)
M749)
Rear Splashguard installation (M313)
c.
Rear Splashguard Removal (All models except
M313)
Initial Setup:
Materials/Parts:
Tools/Test Equipment:
l Two locknuts
l General mechanic’s tool kit
l Nineteen Iockwashers
a.
FRONT SPLASHGUARD REMOVAL (ALL MODELS EXCEPT M749)
1.
Remove cable reel and mounting bracket assembly (para 4-59).
2.
Remove two bolts (3), washers (2), and locknuts(l) from splashguard (9). Discard Locknuts.
3.
Remove three capscrews (7), lockwashers (5), and nuts (4) from bracket (6) and splashguard (9). Discard
Iockwashers.
4.
Remove nine capscrews (8), lockwashers (1 2), nuts (13), reinforcement bar (n), cable reel shield (10), and
splashguard (9) from bracket (6) .Discard lockwashers.
b.
FRONT SPLASHGUARD INSTALLATION (ALL MODELS EXCEPT M749)
1.
Position splashguard (9), cable reel shield (1 O), and reinforcement bar (11) in place on bracket (6) and secure
with nine capscrews (8), new Iockwashers (12), and nuts (13).
2.
Install three capscrews (7), new Iockwashers (5), and nuts (4) in bracket (6) and splashguard (9).
3.
Install two bolts (3), washers (2), and new locknuts (1) on splashguard (9).
4.
Install cable reel and mounting bracket assembly (para 4-59).
4-122
