TM 9-2330-238-14
4-28. BLACKOUT STOPLIGHT MAINTENANCE (EARLY MODEL).
This Task Covers:
a.
Lamp Replacement
d.
Cleaning and Inspection
b.
Removal
e. Assembly
c.
Disassembly
f .
Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
l Towing vehicle intervehicular cable disconnected
from semitrailer (para 2-11).
• Adhesive (Item 1, Appendix E)
l Dishwashing compound (Item 6, Appendix E)
Tools/Test Equipment:
l Dry cleaning solvent (Item 14, Appendix E)
l General mechanic’s tool kit
• One Iockwasher
a.
LAMP REPLACEMENT
1.
Remove two screws (8), door assembly (7), and gasket (6) from housing (2).
2.
Push in on lamp (5), turn counterclockwise, and remove from socket (4).
3.
Install lamp (5) in socket (4), push in, and turn clockwise.
4.
Position door assembly (7) and gasket (6) in place on housing (2) and install two screws (8).
b.
REMOVAL
1.
2.
Disconnect connector (1) from housing (2).
Remove bolt (17), Iockwasher (16), and housing (2) from rear crossmember of chassis frame. Discard
Iockwasher.
TA701951
4-42
