TM 5-4930-244-14
(1)
Remove two bolts (1) and two locknuts (2) from trailer frame (3) holding lunette eye (4). Remove lunette eye (4).
(2)
Remove fire extinguisher (5) and mounting bracket (6) from trailer frame (3) by removing two screws (7) and two
locknuts (8).
(3)
Remove amber reflector (9) and red reflector (10) by removing hex head cap screws (11) and self-locking nuts
(12) Typical on trailer frame (3). Discard self-locking nuts (12).
(4)
Remove amber clearance marker (13) and grommet (14) from trailer frame (3) Typical both left and right side of
trailer frame (3).
(5)
Remove stop/tail/turn light (15) and grommet (16) from rear of trailer frame (3) Typical both left and right rear of
trailer frame (3).
(6)
Remove three red clearance markers (17) and three grommets (18) from rear of trailer frame (3).
b.
Repair.
(1)
Inspect trailer frame assembly (3) for dents cracks or corrosion
(2)
Weld cracks as needed (Ref. TM 2-237)
(3)
Fix dents as needed (Ref. FM 43-2).
(4)
Clean off corrosion with wire brush then repaint in accordance with TM 43-0139.
c.
Assembly.
(1)
Install three grommets (18) and three red clearance markers (17) into rear of trailer frame (3).
(2)
Install grommets (16) and stop/tail/turn light (15) into trailer frame (3). Typical both left and right rear of trailer
frame (3) (3) Install grommets (14) and amber clearance marker (13) into trailer frame (3). Typical both left and
right side of trailer frame.
(4)
Install amber reflector (9) and red reflector (10) onto trailer frame (3). Secure reflectors to trailer frame (3) by
installing hex head cap screws (11) and new self-locking nuts (12). Typical on trailer frame (3).
(5)
Align mounting bracket (6) holes up with holes in trailer frame (3). Install two screws (7) through trailer frame (3)
and mounting bracket (6) Secure screws (7) with two locknuts (8). Install fire extinguisher (5) into mounting
bracket (6).
(6)
Align lunette eye (4) holes up with holes in trailer frame (3). Install two bolts (1) through holes in trailer frame (3)
and lunette eye (4) Secure bolts (1) with two locknuts (2). Tighten
5-97
