TM 5-4930-244-14
5-5.
GEAR-LUBE AND OIL DISPENSERS - REPAIR.
This Task Covers:
a.
Disassembly
b.
Repair
c.
Assembly
Initial Setup:
Tools and Test Equipment Required
Tool Kit, General Mechanic's: Automotive (Appendix B, Section II, Item 1).
Equipment Condition
Unit shut down and cool.
Gear Lube and Engine Oil Dispensers removed (para. 4-23).
a.
Disassembly. (Refer to Figure 5-5).
Gear-Lube.
(1)
Remove two retaining rings (1) from pin (2) on both sides of lever (3).
(2)
Remove pin (2) from oil lube dispenser (4) and lever (3).
(3)
Remove lever (3) from oil lube dispenser (4).
(4)
Remove oil lube nozzle assembly (5) from oil lube dispenser (4).
(5)
Remove four screws (6) from dial (7).
(6)
Remove dial (7) and totalizer (8) from oil lube dispenser (4). Oil Lube
(7)
Remove two retaining rings (9) from pin (10) on both sides of lever (11).
(8)
Remove pin (10) from gear lube dispenser (12).
(9)
Remove extension (13) from gear lube dispenser (12).
(10)
Remove gear lube nozzle assembly (14) from extension (13).
(11)
Remove four screws (15) from dial (16).
(12)
Remove dial (16) totalizer (17) from gear lube dispenser (12).
b.
Repair.
Inspect all parts for wear or damage. Replace as needed.
5-14
