TM 5-4930-244-14
(7)
Install two innermost bolts (9) and two washers (11), and raise belt adjustment bracket (18) with J-bolt (17) up and
onto these two innermost bolts (9). Fasten with two locknuts (10). Slightly tighten bolts.
(8)
Install washer (20) and flanged nut (21) onto J-bolt (17) and tighten.
(9)
Install air compressor belts. (Refer to para. 4-31).
(10)
Adjust air compressor belts. (Refer to para. 4-31).
(11)
Install belt guard. (Refer to para. 4-31).
(12)
Connect braided steel hose (6) to check valve (7).
(13)
Connect air tubing (8) at elbow fitting on check valve (7).
(14)
Clean male threads on drain valve (3), elbow (14), nipple (15), and bushing (16). Tape threads with Teflon tape.
(15)
Install nipple (15) into bushing (16), then install both into lower side of air compressor (2).
(16)
Install elbow (14) onto nipple (15).
(17)
Insert drain valve (3) into elbow (14) and tighten, making sure handle on drain valve is pointing away from base of
air compressor (2).
(18)
Install hose (13) onto drain valve (3), tighten hose clamp (12) upon hose and drain valve.
(19)
Fill oil reservoir on air compressor (2) with oil. (Refer to para. 4-34.a.).
4-94
