TM 5-4930-244-14
d.
Assembly.
(1)
Slide cap and strainer assembly (5) through flange (6) until flange is flush on cap housing.
(2)
Install six pan head screws (11), ground wire (4) and nuts (12) to attach cap and strainer assembly (5) to
flange (6).
(3)
Slide clamps (7 and 9) onto hose (8).
(4)
Install hose (8) onto cap and strainer assembly (5) and tighten clamp (7).
e.
Installation.
(1)
Slide hose (8) onto fuel tank (10) neck, slide down clamp (9) and tighten clamp.
(2)
Install pan head screw (1), lockwasher (2) and ground wire (4) onto fuel level sending unit (3).
Figure 4-8. Fuel Cap and Neck Assembly
4-33
