TM 5-3825-230-14&P
Section II. SERVICE UPON RECEIPT
4-4. SERVICE UPON RECEIPT.
The sweeper may be shipped or received with the motor guard and hydraulic motor temporarily attached to the main
frame rather than the broom head. The hydraulic hoses are connected and bundled with the sprinkler hose. Perform the
following to prepare the unit for use.
NOTE
Tie wraps are used only to secure lines and harness for shipping. Quantity of tie wraps used
may vary.
(1)
Remove tie wraps (1) securing broom motor hydraulic lines (2) to sprinkler line (3).
(2)
Remove hydraulic motor and bracket assembly (4) from stowage position on frame (5) using a 3/4 in. open
end wrench, ratchet and 3/4 in. socket. Retain hardware for use during installation.
(3)
Remove hydraulic motor guard (6) from stowage position on frame (5). Retain hardware for use during
installation.
(4)
Remove plastic tie wraps which secure wiring harnesses (7 and 8) together.
(5)
Connect sprinkler line (3) to spray bar fitting (9) and tighten clamp (10) using a flat tip screwdriver.
(6)
Install hydraulic motor and mount (para 4-102).
(7)
Install hydraulic motor guard (para 4-116).
4-4
