TM 5-3825-230-14&P
b.
Installation.
WARNING
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and
are harmful to skin and clothing. To avoid injury or death, keep away from open fire and use in a
well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash
immediately with soap and water.
(1)
Lightly apply pipe thread sealing compound to threads of beaded adapters (20 and 21).
(2)
Install beaded adapters (20 and 21) in pump (19) using a 11/16 in. open end wrench.
(3)
Position bracket (12) on pump (19) and install four screws(15), four washers (16), four grommets (17), and
four locknuts (18) using a 7/16 in. open end wrench, ratchet and 7/16 in. socket.
NOTE
Position rear of pump facing tire.
(4)
Install brackets (13 and 12), screws (14), and locknuts (11) on frame (4) using a 3/4 in. open end wrench,
ratchet and 3/4 in. socket.
(5)
Install hoses (9 and 10) on beaded inserts (20 and 21), and tighten clamps (7 and 8) using a screwdriver.
(6)
Connect wire (5) to connector (6).
(7)
Position ground wire (3) on frame (4) and install lockwasher (2) and nut (1) using a ratchet and 7/16 in.
socket.
NOTE
Follow-on maintenance:
•
Connect battery cables (para 4-73)
•
Open water tank shut off valve (para 2-
8)
•
Check spray system for leaks
END OF TASK
4-217
