TM 5-3825-230-14&P
4-110. TACHOMETER AND TACHOMETER CABLE REPLACEMENT.
This task covers:
a.
Removal
b.
Installation
INITIAL SETUP:
Tools
Equipment Condition
Tool Kit, General Mechanic's: Automotive
TM or Para
Condition Description
Para 4-73
Battery cable
Materials/Parts
disconnected.
Star washers
Para 4-109
Tachometer cable
Lockwashers
disconnected from
tachometer gear.
a. Removal
(1)
Remove screw (1), lockwasher (2), and washer
(3) using a 7/16 in. open end wrench. Lower
panel (4).
(2)
Remove wire and bulb (5).
(3)
Remove tachometer cable (6).
CAUTION
Hold gage from front or damage to gage may
result.
(4)
Remove two nuts (7), two star washers (8), and
two brackets (9) using a 5/16 in. Open end
wrench.
(5)
Remove gage (10) from front of panel (4).
b. Installation.
(1)
Install gage (10) in front of panel (4).
(2)
Lower panel (4), and install two brackets (9), two star washers (8), and two nuts (7) using a 5/16 in. Open end
wrench.
(3)
Install tachometer cable (6) using pliers.
(4)
Install wire and bulb (5).
(5)
Raise panel (4), and install washer (3), lockwasher (2), and screw (1) using a 7/16 in. open end wrench.
NOTE
Follow-on maintenance:
Connect battery cables (para 4-73)
Connect tachometer cable to tachometer gear (para 4-109)
END OF TASK
4-199
