TM 5-3805-296-23-6
0407
REMOVAL CONTINUED
WARNING
Allow hydraulic system to cool before performing procedure. Hot hydraulic fluid can cause
severe burns. Wear eye, hand, and skin protection when working with heated parts.
Hydraulic oil is very slippery. Immediately wipe up any spills. Failure to follow this warning
may result in injury or death to personnel.
CAUTION
Plug and cap all hydraulic lines and fittings to prevent contamination.
NOTE
Note position of P-clamp and insulator to aid in installation.
Tag and mark hydraulic lines to aid in installation.
Note routing and location of hydraulic lines to aid installation.
12. Remove nut (Figure 4, Item 11), washer (Figure 4, Item 10), P-clamp (Figure 4, Item 6), washer (Figure 4, Item
8), and bolt (Figure 4, Item 7) from bracket (Figure 4, Item 9).
13. Remove P-clamp (Figure 4, Item 6) and insulator (Figure 4, Item 5) from cushion hitch hydraulic line
(Figure 4, Item 4).
14. Remove four bolts (Figure 4, Item 1), washers (Figure 4, Item 2), cushion hitch hydraulic line (Figure 4, Item 4),
and O-ring (Figure 4, Item 12) from leveling valve (Figure 4, Item 3). Discard O-ring.
15. Remove cushion hitch hydraulic line (Figure 4, Item 4) from machine.
0407-8