TM 5-3805-296-23-6
0392
REMOVAL
000392
WARNING
Allow hydraulic system to cool before performing procedure. Hot hydraulic fluid can cause
severe burns. Wear eye, hand, and skin protection when working with heated parts. Install
covers on cylinder ports to prevent sudden movement of cylinder rod and loss of cylinder
balance. Hydraulic oil is very slippery. Immediately wipe up any spills. Failure to follow this
warning may result in injury or death to personnel.
CAUTION
Plug and cap all hydraulic hoses and fittings to prevent contamination.
NOTE
Tag and mark hydraulic hoses to aid in installation.
Note routing and location of hydraulic hoses to aid in installation.
1. Loosen tube nut (Figure 1, Item 3) and hydraulic hose (Figure 1, Item 2) from fitting (Figure 1, Item 8).
2. Remove O-ring (Figure 1, Item 1) from fitting (Figure 1, Item 8). Discard O-ring.
3. Loosen tube nut (Figure 1, Item 5) and hydraulic hose (Figure 1, Item 4) from fitting (Figure 1, Item 7).
4. Remove O-ring (Figure 1, Item 6) from fitting (Figure 1, Item 7). Discard O-ring.
0392-2