TM 5-3805-296-23-5
0300
REMOVAL
000300
WARNING
Hydraulic oil is very slippery. Immediately wipe up any spills. Failure to follow this warning
may result in injury or death to personnel.
To prevent injury to personnel, wear protective eye covering and gloves.
Failure to follow these warnings may result in injury or death to personnel.
NOTE
Tag and mark hose to aid in installation.
Cap and plug hose and fittings to prevent contamination.
Use a container to catch any fluid that may drain from hoses or system. Dispose of fluid
IAW local policy and ordinances. Ensure all spills are cleaned up.
1. Loosen tube nut (Figure 1, Item 4) and remove hydraulic hose (Figure 1, Item 1) from fitting (Figure 1,
Item 2) on steering control valve.
2. Remove O-ring (Figure 1, Item 3) from fitting (Figure 1, Item 2). Discard O-ring.
3. Remove four bolts (Figure 1, Item 8), washers (Figure 1, Item 7), spacers (Figure 1, Item 6), and splash guard
(Figure 1, Item 5) from cab.
0300-2
