TM 5-3805-296-23-2
0141
Table 1. All Lights, Horn, and Backup Alarm Fail To Operate Continued.
0141
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
4. If removed, install horn enable
All Lights, Horn, and Backup
relay (Figure 1, Item 1), backup
Alarm Fail To Operate
alarm enable relay
Continued
(Figure 1, Item 2), and flood
enable relay (Figure 1, Item 3) on
circuit breaker panel
(Figure 1, Item 4).
5. If removed, install HVAC control
backlight bulb (Figure 9, Item 3) on
connector H-C23 (Figure 9, Item 1)
and install connector on plate
(Figure 9, Item 2).
6. If removed, install plate
(Figure 2, Item 1) and four bolts
(Figure 2, Item 2) on headliner
(Figure 2, Item 3).
7. If removed, install dome lamp
(WP 0471).
8. If separated, install boot
(Figure 3, Item 1) on turn signal
switch (Figure 3, Item 2).
9. If removed, install LED on
connector P-C14 and P-C15
(Figure 10, Items 4 and 5) and
install connectors on quad-gauge
module (Figure 10, Item 3).
10. If removed, install LED on
connector P-C20 and P-C21
(Figure 10, Items 1 and 13) and
install connectors on
speedometer/tachometer module
(Figure 10, Item 14).
11. If removed, install LED on
connector P-C9 (Figure 10, Item 6)
and install connector on instrument
panel (Figure 10, Item 12).
12. If removed, install transmission
shifter on machine (WP 0502).
13. If removed, install two new tiedown
straps (Figure 6, Item 1) on rear
blackout lamp housing
(Figure 6, Item 2) and wiring
harness (Figure 6, Item 3).
0141-38
