TM 5-3805-296-23-2
0105
Table 1. Engine Cranks Slow Continued.
0105
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Engine Cranks Slow
Test Step 7. Test for Seized Engine.
Crankshaft Fails to Turn or is
Continued
Manually turn engine to verify if
Difficult to Turn Replace engine
internal engine components are stuck
assembly (WP 0189, WP 0190,
or broken (WP 0163).
WP 0191).
Proceed to Test Step 9.
Crankshaft Not Difficult to Turn
Replace left starter (WP 0217) and right
starter (WP 0218).
Proceed to Test Step 9.
Test Step 8. Inspect Starters and
Flywheel.
Remove and inspect left starter for
Starter(s) Worn/Damaged Replace
wear and damage (WP 0217). Remove
left starter (WP 0217) and right starter
and inspect right starter for wear and
(WP 0218).
damage (WP 0218). Also, inspect
Proceed to Test Step 9.
flywheel for wear and damage
Flywheel Worn/Damaged Replace
(WP 0539).
flywheel (WP 0202).
Proceed to Test Step 9.
Test Step 9. Verify Malfunction is
Resolved.
1. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-3805-296-10).
2. Ensure all harness connectors are
connected and boots are
positioned to cover terminals.
(WP 0205).
4. Move switch (Figure 9, Item 2)
downward to engine run position
and close cover (Figure 9, Item 1).
0105-12
