TM 5-3805-296-23-1
0016
Table 1. 0004 Fuel Injector Diagnostic Codes Continued.
016
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 2. Test for Shorted Engine
0004-06 Cylinder #4 Injector
Injector Wiring Harness.
Current Above Normal
1. Turn ignition switch and battery
Continued
disconnect switch to OFF position
(TM 5-3805-296-10).
2. Remove valve cover (WP 0182).
3. Disconnect connector CN-C4
(WP 0012, Figure 6) from fuel
injector #3 (WP 0012, Figure 5).
4. Disconnect connector CN-C5
(WP 0012, Figure 8) from fuel
injector #4 (WP 0012, Figure 7).
5. Using digital multimeter
Continuity Replace engine injector
(WP 0540), test for continuity
wiring harness (WP 0183).
between connector CN-C1
Proceed to Test Step 4.
terminal 4 (WP 0012, Figure 13)
No Continuity Proceed to step 5.
and all other terminals
in connector CN-C1
(WP 0012, Figure 13).
6. Using digital multimeter
Continuity Replace engine injector
(WP 0540), test for continuity
wiring harness (WP 0183).
between connector CN-C1
Proceed to Test Step 4.
terminal 4 (WP 0012, Figure 13)
No Continuity Replace fuel injector
and ground.
#4 (WP 0232).
Proceed to Test Step 4.
0016-14