TM 5-3805-296-23-1
0014
Table 1. 0002 Fuel Injector Diagnostic Codes Continued.
014
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 2. Test for Shorted Engine
0002-06 Cylinder #2 Injector
Injector Wiring Harness.
Current Above Normal
1. Turn ignition switch and battery
Continued
disconnect switch to OFF position
(TM 5-3805-296-10).
2. Remove valve cover (WP 0182).
3. Disconnect connector CN-C2
(WP 0012, Figure 2) from fuel
injector #1 (WP 0012, Figure 1)
(WP 0232).
4. Disconnect connector CN-C3
(WP 0012, Figure 4) from fuel
injector #2 (WP 0012, Figure 3).
5. Using digital multimeter
Continuity Replace engine injector
(WP 0540), test for continuity
wiring harness (WP 0183).
between connector CN-C1
Proceed to Test Step 4.
terminal 2 (WP 0012, Figure 13)
No Continuity Proceed to step 5.
and all other terminals
in connector CN-C1
(WP 0012, Figure 13).
6. Using digital multimeter
Continuity Replace engine injector
(WP 0540), test for continuity
wiring harness (WP 0183).
between connector CN-C1
Proceed to Test Step 4.
terminal 2 (WP 0012, Figure 13)
No Continuity Replace fuel
and ground.
injector #2 (WP 0232).
Proceed to Test Step 4.
0014-14