TM 5-3805-296-10
0012
Table 1. Preventive Maintenance Checks and Services (PMCS) Continued.
ITEM TO BE
CHECKED OR
EQUIPMENT NOT
ITEM
MAN-
SERVICED
PROCEDURE
READY/AVAILABLE IF:
NO.
INTERVAL
HOURS
70
After
Radiator
a. Check coolant level on
Coolant level is low or
(Cont.)
Coolant Level
coolant tank sight glass. If
cap is damaged.
coolant level completely fills
the sight glass, coolant level is
OK. If coolant level can be
seen in sight glass, coolant
level is low.
b. Clean area around cap.
c. Remove cap and add
coolant (WP 0024, Item 1) to
maintain level between
bottom of filler tube and top of
sight glass.
d. Clean and inspect, then
install pressure cap.
e. Inspect engine drive belt
Drive belt loose or
for looseness and fraying.
frayed.
71
After
Refueling
WARN I N G
DO NOT smoke or permit any open flame in area
of machine while you are servicing diesel fuel sys-
tem. Be sure hose nozzle is grounded against filler
tube during refueling to prevent static electricity.
Operating personnel must wear fuel-resistant
gloves when handling fuels. If exposed to fuel,
promptly wash exposed skin and change fuel-
soaked clothing.
Failure to follow this warnng may result in injury to
i
personnel or equipment damage.
N OT E
Place portable fire extinguisher within reach prior
to refueling.
DO NOT overfill fuel tank. If fuel starts foaming
from fuel tank, stop IMMEDIATELY to avoid fuel
spillage.
0012-61
