TM 5-3805-296-10
0007
DECALS, DATA PLATES, AND STENCILS CONTINUED
KEY
COMPONENT
DESCRIPTION
1
Machine Certification Decal
This machine has been certified to the standards that are
listed on the certificate film. The maximum mass of the
machine, which includes the operator and the attachments
without a payload, should not exceed the mass on the
certification film.
2
Product Link Decal
Warning - Deactivate Product Link communication device
within 40 ft. (12 m) of a blast site.
3
ROPS/FOPS Decal
Warning - Structural damage, an overturn, modification,
alteration, or improper repair can impair this structure's
protection capability thereby voiding certification. DO NOT
weld on or drill holes in the structure.
4
Do Not Operate Decal
Warning - DO NOT operate or work on this machine unless
you have read and understand the instructions and warnings
in this manual. Failure to follow the instructions, or heed the
warnings, could result in injury or death.
5
Seat Belt Decal
Warning - A seat belt should be worn at all times during
machine operation to prevent serious injury or death in the
event of an accident or machine overturn. Failure to wear a
seat belt during machine operation may result in serious injury
or death.
6
Top Gear Control Button Decal
Press lower button for top gear control.
7
Alternate Exit Decal
If the primary exit is blocked, use the hammer to break the
window. Exit the machine through the window.
8
Joystick Decal
Joystick operated work tool instruction.
0007-7
