TM 1-1740-204-13&P
3-14.2. TIRE FILLING HOSE
a.
Inspect the rubber hose section (7) of the tire filling hose for nicks, cuts and abrasions. Examine the crimps at
the hose ends.
b.
Examine both coupler (8) and plug (9) end of the quick disconnect fittings for wear.
c.
Push the male quick disconnect plug (9) into the tire filling output connector (item C4 of Figure 2-1) of the cart.
Apply 90 psi of pressure using the tire servicing procedure of paragraph 2-10.b. Listen for leaks.
END OF TASK
3-10
