TM 1-1740-204-13&P
Section I. Repair Parts, Special Tools, TMDE, and Support Equipment
SECTION CONTENTS
PARA
PAGE
TOOLS AND TEST EQUIPMENT LIST
3-3
3-2
SPECIAL TOOLS, TMDE AND SUPPORT EQUIPMENT
3-4
3-2
REPAIR PARTS
3-5
3-2
3-3. TOOLS AND TEST EQUIPMENT LIST
Tools and test equipment required for maintenance of the High Pressure Nitrogen Servicing Cart are identified in the
Maintenance Allocation Chart, Appendix B.
3-4. SPECIAL TOOLS, TMDE, AND SUPPORT EQUIPMENT
There are no special tools required for test or inspection procedures at the AVUM level.
3-5. REPAIR PARTS
Repair parts are listed in the Repair Parts and Special Tools List (RPSTL) in Appendix C of this manual.
Section II. Service Upon Receipt
3-6. GENERAL
a.
Visually check the exterior of the High Pressure Nitrogen Servicing Cart for apparent damage. Check contents
to assure that all components listed in APPENDIX C (RPSTL) of this manual are enclosed and undamaged.
b.
If the equipment has been damaged, report the damage on SF 368 (REPORT OF DISCREPANCIES). Check
the equipment against the packing slip to see if the shipment is complete. Report any discrepancies in
accordance with the instructions of DA PMA 738-751.
3-2
