LO 5-3820-242-12
*KEY-
EXPECTED TEMPERATURES
Above +15 F
+ 40 F to -15 F
+40 F to -65 F
LUBRICANTS
CAPACITY
INTERVALS
(Above -9 )
(+ 4 to -26 )
(+4 to -54 )
OE/ - Lubricating
OE/HDO
30
OE/HDO
10
C/MR-
HDO Oil, Internal
Condition
Monitor
Engine,
Tactical
Service
OEA
OEA - Lubricating Oil,
Internal
Arctic
6 qts.
(5.67 L)
Intervals
- Air Cleaner
2/3 qt.
(0.80 L)
given are
- Hydraulic
260 qts.
Tank
(246 L)
in hours
- Transmission
13 qts.
of normal
(12.30 L)
operation.
GO
- Lubricating
GO
80W/90
GO
80W/90
GO
75W
Oil, Gear,
Multipurpose
- Right Angle
3 qts.
Drive
(2.84 L)
Final Drive
3-1/2 qts
(3.31 L)
- Winch
1 qt.
(0.946 L)
GAA - Grease,
ALL TEMPERATURES
Automotive
and Artillery
*See Note 12 for lubricant specification number
temperature ranges prescribed in the Key, OEA lubricant
is to be used in place of OE/HDO-10 lubricant for all
NOTES:
temperature ranges where OE/HDO-10 is specified in
1.
FOR OPERATION OF EQUIPMENT IN
the Key.
PROTRACTED COLD TEMPERATURES BELOW-15 F
2. ENGINE OIL LEVEL HOT OR COLD CHECK. Oil
(-26C).
level should be between high and low marks on dipstick
temperatures above -15F (-26C). Relubricate with
(allow to set 5 minutes before checking).
lubricants specified in Key for temperatures below -15 F
(-26C).
If OEA lubricant is required to meet the
TA 220060
CARD 4 of 5