TM 9-6230-210-13&P
Table 4-1 contains the necessary hardware to mount the Generator Set.
Table 4-1. Generator Set Mounting Hardware
REF NO.
PART
QTY
1
WASHER, FLAT Round, 1/2, screw size
4
2
SCREW, CAP, HEXAGON HEAD: 1/2-13 X 1-3/4 MS90725-114
4
(96906)
3
WASHER, BEVELED 13206E4482-2 (97403)
4
4
SPACER 13212E3554 (97403)
4
b. Assembly of equipment.
(1) Generator Set.
NOTE
The generator set is mounted directly behind the splash panel in a horizontal position
with the engine end facing the protective screen.
LEGEND
1 WASHER
2 SCREW
3 BEVELED
WASHER
4 SPACER
5 GENERATOR
SET
(a) Position generator set (5) in place on trailer bed.
NOTE
Refer to Table 4-1 for listing for listing of parts required.
(b) Install to trailer with four flat washers (1), screws (2), beveled washers (3), and spacers (4).
4-6