TM 9-6230-210-13&P
(3) Trailer. Refer to TM 92-2330-251-14
c. Operation In Dusty Or Sandy Areas.
(1)
(2)
(3)
Protection. Shield the generator set from dust. Take advantage of natural barrers which offer protection from
dust and sand.
Lubrication. Clean all lubrication points before applying lubricants. Clean area around oil filler cap before
inspecting and adding oil. Lubricate more frequently then specified in LO 5-6230-210-12 to prevent excessive
wear. The lubrication interval should be shortened according to prevailing conditions.
Fuel. Prevent sand from entering fuel while servicing the fuel tank. Service fuel tank strainer prior to adding
fuel.
d. Operation Under Rainy Or Humid Conditions.
(1) Fuel. Keep the fuel tank as full as possible to prevent condensation.
(2) Electrical system. Humid conditions can cause corrosion and deterioration of electrical components. Keep
electrical components and wiring dean and dry.
e. Operation In Salt Water Areas.
(1) General. Wipe the floodlight set and generator set with a dean cloth dampened with dean, freshwater at
frequent intervals. Use care not to contaminate the fuel supply or damage the electrical system with water.
Lubrication. Lubricate more frequently than specified in LO 5-6230-210-12.
Preservation. Paint all exposed non-polished surfaces. Coat exposed parts of polished steel or other ferrous
material with standard issue rust-proofing material if avaible or rover with with one light coat of grease.
2-41/(2-42 blank)