TM 9-6230-210-13&P
f. Tag and identity two leads (7).
g. Loosen two screws (10) and remove leads.
h. Remove receptacle (8).
i. Remove nut (11), Iockwasher (12), and screw (13).
j. Replace unserviceable receptacle with serviceable item from stock.
k. Install&x (9) to control panel with screw (13), Iockwasher (12), and nut (11) and tighten.
l. Install two leads (7) and remove tags.
m. Tighten two screws (10).
n. Install receptacle (8) in box.
o. Install two screws (6) and tighten.
p. Install gasket (5) in plain.
q. Install cover (4) over gasket.
r. Install screw (3), tighten, and close door (2).
s. Install four screws (1) and tighten.
t. Perform operational check (para 2.8).
4-58