TM 9-4940-568-34
6-17
(16) Remove bearing race (18) from motor
housing (1).
NOTE
Plug (19) may be pushed out
from oil port hole.
(17) Remove plug (19) from motor housing
(1).
(18) Remove preformed packing (20) from
plug (19). Discard preformed packing.
(19) Remove motor housing (1) from vise.
b. Cleaning/Inspection
(1) Clean all parts.
(2) Inspect motor housing (1) and motor
housing flange (12) for cracks or
damage.
(3) Inspect all other parts. Replace all parts
failing inspection.
c. Assembly
NOTE
Lubricate all parts with clean
hydraulic oil.
(1) Install output shaft (2) in motor housing
(1).
(2) Install needle thrust bearing (11), then
bearing race (18) on shaft (2). Pull shaft
(2) partially out of housing (1). Push all
three parts in housing (1) together.
(3) Install preformed packing (20) on plug
(19).
(4) Install plug (19) in motor housing (1).
(5) Install backup washer (17), seal (16),
and seal (15) in motor housing flange
(12).
(6) Install seal (14) in motor housing flange
(12).