TM 9-4940-568-34
6-9
(8) Remove setscrew (16) from cylinder
barrel (17).
Cylinder must not be dented
when held in vise, or leakage
and improper operation may
result.
(9) Place cylinder barrel (17) in chain vise
with wooden blocks.
(10) Remove wear ring (18) from cylinder
head (19). Discard split ring.
NOTE
Cylinder head is threaded.
(11) With the aid of an assistant, pull cylinder
rod (3) out of cylinder barrel (17). Allow
hydraulic fluid to drain into drain pan.
(12) Remove cylinder head (19) and cylinder
rod (3) from cylinder barrel (17).
(13) Remove cylinder head (19) from
cylinder rod (3).
NOTE
Note position of seal assemblies
and ring.
(14) Turn cylinder rod (3) around and remove
two seal assemblies (21) and ring (20)
from
piston
(22).
Discard
seal
assemblies and ring.