TM 9-4940-568-34
5-57
(2)
Remove hose (4) from bracket (5).
(3)
Remove eight mounting screws (6).
The flywheel housing weighs
approximately 50 lbs (23 kg).
Attach suitable lifting device to
prevent possible injury to
personnel.
(4)
With aid of an assistant attach lifting device
to flywheel housing (7).
(5)
With aid of an assistant using a soft plastic
hammer, loosen the flywheel housing (7).
(6)
Remove flywheel housing and preformed
packaing (8) from cylinder block (9).
Discard seal.
(7)
Remove lifting device from flywheel
housing (7).
b.
Disassembly.
Wear eye protection when
driving the ring gear from
flywheel. Serious injury may
result from flying metal
fragments. Do not use a steel
drift pin.
(1)
Using brass drift pin, drive ring gear (1)
from the flywheel (2). Discard ring gear.
6
7
8
2
1
4
5
7
9