TM 9-4940-568-34
3-126
3-38. HOIST MOTOR CONTROL VALVE REPLACEMENT (Continued)
(4) Remove and discard two preformed
packings (11) from hoist control valve
(9).
(5) Remove two fittings (3) from hoist
control valve (9).
(6) Remove and discard two preformed
packings (12) from fittings (3).
(7) Remove fitting (6) from hoist control
valve (9).
(8) Remove and discard preformed packing
(13) from fitting (6).
(9) Remove two plugs (14 and 15) and
preformed packings (16 and 17) from
hoist control valve (9). Discard
preformed packings.
b.
Installation
NOTE
Lubricate all preformed packings
with clean hydraulic oil.
(1) Install two preformed packings (17 and
16) and plugs (15 and 14) in hoist
control valve (9).
(2) Install preformed packing (13) on fitting
(6).
(3) Install two preformed packings (12) on
fittings (3).
(4) Install fitting (6) and two fittings (3) in
hoist control valve (9).
(5) Install two preformed packings (11) on
hoist control valve (9).