TM 9-4940-568-34
3-9
a.
Removal.
1
2
The crane hydraulic system operates at oil pressures up to 3,500 psi (24,132 kPa). Never
disconnect any hydraulic line or fitting without crane stowed with no load at zero pressure.
Failure to comply may result in serious injury or death to personnel.
Crane assembly weighs approximately 5,700 lbs (2,586 kg). Attach suitable lifting device
to prevent possible injury to personnel.
NOTE
Remove cable ties as required.
Cap and plug all hydraulic hoses and fittings to prevent contamination.
Note location and position of fittings and adapters as each item is removed.
Tag and mark all hydraulic hoses prior to removal.
Place drain pan to catch hydraulic oil during removal of hydraulic lines.
(1)
Disconnect three hydraulic hoses (1) from three hydraulic quick disconnects (2).